Brakes/Levers/Pads

Paceline disc brake rotors incorporate the elegant design of our eTap AXS road groupsets and feature a new brake track vent design for smooth, quiet braking performance. - Designed for road use - Paceline brake track offers quiet brake operation

Meet the new standard for hard-hitting, heavy-duty braking. We added 15% extra piston power and 30% more volume in the lever reservoir, ensuring peak performance for the full run. And with SwingLink and Lever Pivot Bearing technologies, lever feel remains smooth and progressive, no matter how hard the pull. Go deeper and grab more power. - Designed specifically for heavy-duty demands. - Pivot bearing offers crisp lever feel and a fatigue-free ride. - Metallic pads come standard for more power and longer wear.

SRAM's CenterLine rotors are light-weight, quiet, smooth and robust, featuring a two-piece design with an aluminum center and steel brake track.

- Thinline: Thinner, longer molded pads for extra clearance and easy adjustment - Red: semi-aggressive compound for good performance - Salmon: aggressive compound for extreme weather conditions - Dual: combination of Salmon and Black compounds for more controlled, smoother stopping

TRP's two-piece rotors offer superior heat dissipation due to the aluminum center as well as excellent stiffness to provide you with confidence in your braking and lighter weight in 180/203mm sizes. Its two-piece design is now combined with TRP's new slotted rotor design with a 2.3mm thickness for DHR and E-MTB only. When debris gets trapped between the pad and rotor, braking power is dramatically reduced. This rotor's six recessed slots create channels to allow water, mud, and other debris trapped between the pad and rotor to escape under braking for more consistent braking power and modulation in mixed conditions. - Six slots to remove water, mud, and debris - Two-piece design for heat management and stiffness

The squeeze of our levers is what dreams are made of (and you know which dreams we're talking about). Most of our levers can be swapped to be run either front or rear, which is convenient if you like to your brakes reversed and a Godsend if you bust a lever in the middle of the woods. Avid levers are easy to install, simple to set up, and a pleasure to pull. - Reach Adjustment - Qwik-Adjust Barrel Adjuster - Compatible with mechanical disc brakes and linear-pull brakes

With a focus on reduced weight and cross-country tuned stopping power, Shimano SLX M7120 brakes provide intuitive modulation so that you can explore your limits with confidence. The BL-M7100 levers feature an optimized lever axle position, an additional handlebar contact point for greater stiffness, and refined ergonomics for rider comfort. At the caliper end, the BR-M7120 4-piston caliper is optimized for the toughest enduro trails. - 10% stiffer than previous generation M7000, even under high-temp conditions - Quicker brake engagement with shorter free stroke - Tool-free lever reach adjustment - I-SPEC EV Clamp Band enables optional integrated shifter setup - Includes finned metal pads

Key features - Ultra-light direct mount caliper design - Tunable stopping power to dial in the perfect lever feel - Fully adjustable leverage ratio works with all road levers - 95g with hollow arms and TI hardware - For use as front or rear brake - Includes brake pads for aluminum rims

The CenterLine design provides a smooth, consistent, and quiet running braking surface. Rounded edges make for easier wheel installs and are UCI-compliant. - Rounded edges are UCI-compliant and allow for easier wheel installs (140mm, 160mm, 180mm, 200mm) - Compatible with both road and mountain bike brakes

The CenterLine design provides a smooth, consistent, and quiet running braking surface. Rounded edges make for easier wheel installs and are UCI-compliant. - Rounded edges are UCI-compliant and allow for easier wheel installs - Compatible with both road and mountain bike brakes - Includes steel rotor bolts

- Aluminum pad holder with R55C4 pads

Built around one of our original breakthrough designs, the Speed Dial 7 is the smooth and powerful way to control linear-pull or mechanical disc brakes. They are super easy to install and adjust so you can dial in the modulation just the way you like. - Compatible with mechanical disc brakes and linear-pull brakes. - Reach Adjust and Speed Dial Leverage Adjust - Reversible

Avid's BB7 is the mechanical-disc brake that raises the bar. It boasts dual pad-adjustment knobs and Avid's ingenious Tri-Align caliper-positioning system so you can dial in perfect braking in seconds. The BB7 also utilizes precision actuation and variable spring tension to give you serious stopping power and out-of-this-world modulation. And, this setup comes with Avid's CleanSweep rotor for consistent, powerful braking and tool-free pad replacement for easy maintenance.

Avid takes entry level to a whole new level with the BB5s, which feature ball bearings (where the BB comes from in the name), a melt-forged body and a CleanSweep rotor for excellent stopping power and awesome durability. Plus, an inboard pad adjustment knob lets you dial in the perfect distance between the rotor and the pads, while Avid's ingenious Tri-Align caliper-positioning system perfectly aligns the pads parallel to the rotor in seconds. And, the tool-free pad replacement and adjustment makes quick work out of accommodating for pad wear, so you always have positive, powerful braking.

Guide RE is SRAM's optimized braking solution for today's exciting category of E-MTBs, capable of handling the higher average speeds, more intense use and increased mass due to the presence of the motor and battery. It combines SRAM's proven Guide R lever assembly with a powerful 4-piston caliper derived from the gravity-focused Code brakes. The Guide RE provides real, usable on-trail control—optimal power and modulation mean speed can be controlled in all terrain and in all situations, both uphill and downhill. - Guide R lever assembly with proven Guide technologies - Powerful 4 piston caliper derived from the Code gravity specific brakes - Sintered pads for better pad life in intensive use - MatchMaker X compatible - Ambidextrous lever mount - Tool-free reach adjust - Weight: 415 grams (based on direct mount, 800 hose, 160mm CL Rotor) - Lever Material: Aluminum - Caliper Design: 4 piston caliper derived from the Code gravity specific brakes - Finish: Gloss black - Pad: Steel-backed metal sintered - Fluid: DOT 5.1 - Mount: Ambidextrous - Adjustment: Tool-free Reach Adjust, Banjo Adjust - Pivot: Bushing

Ride bigger, steeper, and harder knowing SRAM's DB5 Disc Brake is underneath you, ready to reel in the speed with the flick of a finger. The DB5 hits the sweet spot for control and power on your mountain bike. Borrowing technology like DirectLink and a reshaped bladder from its big brother Guide, great modulation and pinpoint stops are assured. With simple setup and excellent performance, the DB5 is ready for the trail.

Clean up your control center with Avid's Matchmaker clamp. It combines the mounts for your SRAM shifters and Avid brake levers into one simple, sleek unit so you can drop some grams and keep your bar nice and tidy.

With copper plated backing plate and sintered front these Kool-Stop metal disc brake pads are designed to give your bike performance braking in extreme conditions, e.g. XC, downhill, trials and dual slalom riding. Kool-Stop pads have a quick break-in period so you get maximum performance during those demanding rides when stopping power, durability and long pad life are required.

- High performance compound recommended for all-conditions - Alloy backing plate: 50% lighter than steel backing plate

Jagwire Sport Organic pads feature an all-new resin compound. Mounted on a steel backing plate, this compound gives good power and modulation, while keeping noise to a minimum. Great for riders primarily riding in dry conditions. - Fit a variety of Magura brakes and offer industry leading brake compounds for consistent, confident performance - Organic pad for Magura 4-piston brake calipers

- Molded road brake pads - 50mm pad length

Slip Avid's Rim Wrangler 2 Brake Pad Inserts into your Rim Wrangler 2 cartridges (sold separately) for excellent braking no matter the conditions. The easy-to-use cartridge design makes swapping pads a breeze. They're designed for use with linear-pull brakes.

- High quality, durable stainless steel machined braking surface ensures consistent stopping power and resists corrosion - Reinforced rotor design improves stability and resists warping - Compatible with all sintered, semi-metallic, and organic/resin disc brake pad compounds

- Agressive sintered compound - Perfect for wet conditions or for DH rigs - Replacement springs or clips included where required

Shimano BR-RS305 Mechanical Road Disc Brake Caliper - Cable actuated - Single Flat-mount caliper - For use with Drop-Bar or Flat-Bar road levers - L02A Resin Pads - Rotor not included - IceTech pad compatible caliper - Includes fixing bolts for 25mm thick mount - Brake Caliper Type: Flat Mount - Brake Lever Actuation: Short Pull Super SLR - Rotor Included: No - Pad Compound: Resin

TRP’s two piece rotors offer superior heat dissipation due to the aluminium center as well as excellent stiffness to provide you with confidence in your braking. Six recessed slots create channels to allow water, mud, and other debris trapped between the pad and rotor to escape during braking. Upgrade the stopping power and heat dissipation by increasing the size of your rotor giving you more surface area and leverage. SPECIFICATIONS - Sizes: 140mm, 160mm, 180mm, and 203mm - Colors: Black Center - Compatible with Centerlock hubs - Does not include lock-ring

Can be used to provide extra clearance between brake caliper and spokes. Spacer should be placed between rotor and hub.

- Replacement hoods for your Hylex levers. - Color: Black or Gum - Comes in a set of left and right

- Pair of G-Type disc brake pads without fins, for 1 caliper - Resin or Metallic brake compound - Available with Steel backplate for lower cost or Aluminum backplate for superior heat management - Fits 2-piston SLX and XT calipers from 10 to 12 speed groups and 10 or 11 speed XTR brakes - Interchangeable with F-Type and J-Type pads - Includes spring and pin

The CenterLine design provides a smooth, consistent, and quiet running braking surface. Rounded edges make for easier wheel installs and are UCI-compliant. - Compatible with both road and mountain bike brakes - Rounded edges are UCI-compliant and allow for easier wheel installs - Hub interface: CenterLock - Rotor Type: Centerline

- Pair of D-Type disc brake pads without fins, for 1 caliper - Available with Resin or Metallic brake compound - Fits most 4-piston Shimano brakes, including XTR BR-M9120, XT BR-M8120, XT-BR-M8020, SLX BR-M7120, Saint BR-M820 and BR-M810, Zee BR-M640 and non-series BR-MT520 and BR-MT420 calipers - Can be used as a lower cost alternative to H-Type or N-Type pads - Includes spring and pin

The Desist brake kit includes a Restrain brake lever, linear brake cable, and Desist brakes with Koolstop pads. Kink Desist brakes are fully forged from 7075-T6 aluminum for ultimate stiffness. The unique cable pivots and straddle cable system create a smoother and more powerful pull. A low stack spring and cap design also provide extra clearance for drivetrains. This brake set also includes the legendary Kool-Stop brake pads for plenty of stopping power. The Kink Restrain brake lever is constructed from a fully forged aluminum lever, body, and bracket to maximize strength and stiffness. It features a low-profile, finger-friendly design as well as an ergonomically designed lever for added comfort. It's oversized hinge joints and pin increase strength and prevent cracks or breaks from over-tightening. The Restrain lever is also universal and can be used on the right or left side. The Kink Linear brake cable features an outer linear strand housing, which greatly decreases bind when the cable twists during tricks. The inner 1.5mm cable is ground smooth to create an even smoother, drag-free pull. Aluminum ferrules prevent housing failure at both ends, and can easily be refitted after cable trimming.

- Compound designed considering the higher weight and faster speed of E-bikes - Tuned for power, durability, and low noise

- 410 Stainless steel construction - (6) Black M5 mounting bolts - Weights: 68g (140mm) / 85g (160mm) / 112g (180mm)

- Intuitive and powerful braking - Quicker brake engagement with shorter free stroke - Rider tunable and action-optimized cockpit - High-performance brake control - Additional contact point for a stiffer brake lever - 10 deg. rotation angle setting range for I-SPEC EV shifting lever

The Eagle 2 is a revolutionary pad that first utilized the hardened reinforced steel internal backbone. This larger pad has been used in all areas of cycling and is a good choice when frame, wheel and fork design allow. Features: - Hardened and Plated reinforced steel backbone - Patented Angled tip plow - Water grooves - Pad-Lock washer system - Available in Threaded and 2024 Aluminum Smooth Post Black: standard compound designed for dry condition riding Red: semi-aggressive compound for good performance Salmon: aggressive compound for extreme weather conditions Dual: combination of Salmon and Black compounds for more controlled, smoother stopping

Jagwire's Mountain Sport Disc Brake Pads (Hayes) feature a low-noise, semi-metallic compound mounted to a steel backing plate for excellent braking performance and durability.

Jagwire's Road Pro Inserts are a nice upgrade for Shimano and SRAM sidepull brakes. They're made of Jagwire's Pro Series compound in three versions for excellent stopping power in all conditions and with aluminum and carbon rims.

TRP HY/RD disc brake calipers have the power and modulation of hydraulic disc brakes. True ‘plug-and-play’ compatibility with existing cable actuated systems. - Self-contained hydraulic caliper incorporates master cylinder - Hydraulic system self-adjusts for pad wear - Compatible with all mechanical road and CX brake levers - Brake pad composite is Resin with Metal Fibers - Resin with Metal Fibers pads are compatible with Resin-Only type rotors as well as standard rotors

SLX SM-RT70 Center Lock rotors deliver powerful and consistent braking performance in all riding conditions. They feature a 3-layer structure (an aluminum core paired with two stainless steel outer layers) that reduces rotor surface temperatures approximately 100 degrees Celsius compared to all-steel rotors. - Aluminum spider - Includes standard type rotor lockring - Requires external-type rotor lockring when installing onto 15/20mm hubs (sold separately)

- High performance compounds recommended for all-conditions - Steel backing

6-Bolt disc brake rotor - Easy to install anti-loosen plates help secure disc brake rotor bolts in place - Resin/Metal pad compatible - Size: 160, 180, 203, 220mm

Jagwire's Mountain Sport Disc Brake Pads (Tektro) feature a low-noise, semi-metallic compound mounted to a steel backing plate for excellent braking performance and durability.

To keep your Avid brakes functioning properly, check your pads for wear and replace them when necessary. Organic compound pads are softer for quieter braking and increased modulation, while metallic pads dissipate heat better and last a bit longer. Two pads, one retraction spring and a mounting bolt are included (enough for one brake) in each pad set. And, choose an aluminum backing plate if you're really counting the grams.

For aero disciplines, hydraulic disc brakes can reveal a whole new world of speed savings. Less time slowing down is more time going fast. Better brakes mean faster splits, thanks to confidence-inspiring brake performance. - Optimized power and modulation for triathlon and time trial - HydroT brake platform offers superior control, feel, and heat management - Textured carbon brake lever for better finger grip - Stealth-a-majig connector makes initial setup fast and convenient - Bleeding Edge technology for quick, hassle-free bleeds - Adjustable Reach: Yes - Brake Caliper Type: Flat Mount - Brake Lever Actuation: Hydraulic - Front Hydraulic Hose Length: 950mm - Rear Hydraulic Hose Length: 1800mm - Adjustable Contact Point: No - Hydraulic Fluid Type: DOT - Rotor Included: No - Pad Compound: Organic

The SRAM Guide RSC is packed with ride-enhancing performance that makes every new trail a trusted old friend. SRAM started from scratch, to create the perfect combination of braking reliability and control. Brand-new SwingLink technology provides more power, silky-smooth modulation, less deadband and better lever-feel than you’ve ever experienced. Steep-line confidence. Deep-corner dominance. Ride every trail like you own it. Now featuring the World Championship-winning S4 caliper with Bleeding Edge and Heat Shield technologies. - Weight: 381 grams - Lever Material: Aluminum - Caliper Design: 4-piston, dual diameter caliper - Finish: Polished Silver Ano, Black Ano - Pad: Steel-backed organic - Fluid: DOT 5.1 - Mount: Ambidextrous - Adjustment: Tool-free Reach Adjust, Contact Point Adjust, Banjo Adjust - Special Features: Tool-free Reach Adjust, Contact Point Adjust, Piggyback Reservoir, - MatchMaker X compatible, Bleeding Edge, Heat Shield - Tech Highlights: SwingLink, PURE Bladder, Timing Port Closure, Lever Pivot Bearings, - Bleeding Edge, Heat Shield - Material: Forged aluminum *Rotor and adaptor sold separately

- Lightweight aluminum spider design improves stability and durability - Durable stainless steel resists corrosion - Compatible with all disc brake pad compounds

- Exceptional heat management - Rounded edge - UCI approved for road competition

Avid's Front 170mm Post Bracket Hardware Kit has everything you need to mount a 170mm rotor (sold separately) to the front of your bike. Kits include mounting bolts and post mount spacers for front brake installation.

High performance Kevlar, Ceramic, Brass and resin composite material. Provides excellent brake power with minimal effort at the brake lever. Performance is consistent in both wet and dry conditions and pad life is excellent. High quality springs included with every set (where applicable). Fits: Formula - RO Racing - T1 Racing - R1 Racing - R1 - C1 - CR3 - T1 - RO - Mega - The One - RX - RR1 - CURA

Bolt on Avid's 20R Brake Pads for consistent, powerful braking. They're designed for use with linear-pull brakes.

Avid's Front 180mm/Rear 160mm Post Bracket Hardware Kithas everything you need to mount a front 180mm or a rear 160mm rotor (sold separately) to your bike.

Characteristics: - long lasting, high endurance pad compound - very easy modulation of braking force - high temperature stability for consistent brake power - organic formula is low noise and rotor friendly Fits: Avid: - XO Trail - Elixir 9 Trail - Elixir 7 Trail SRAM: - Guide Ultimate,RSC,RS,R,T

Guide T brings consistent performance and reliable stopping power thanks to a revised lever design and lightweight four-piston caliper. Featuring SRAM's Directlink lever, updated master cylinder and timing port closure, all combined to provide a more positive braking system. - Bleeding Edge, drip-free bleed port closure and adaptor to minimize fluid loss - Heat Shield technology to reduce caliper fluid temperature and prevent loss of braking power - MatchMaker compatible for a clean and simplified look - Ambidextrous lever mount design - Lightweight 4-piston dual-diameter caliper - Includes steel-backed organic pads - Front includes 950mm hose - Rear includes 1800mm hose

Smooth, controlled braking is yours with Avid's G2 CleanSweep Rotor. It utilizes cross-drilled technology to dissipate heat and cut weight, giving you a consistent feel at the lever and predictable speed control in all conditions.

Shimano's Deore XT Ice-Tech rotors utilize the industry standard 6-bolt mounting system for secure mounting. These rotors use an aluminum core with steel outer plates to better control the temperature of the braking surface. This means quieter braking and, more importantly, less fade on long downhills and improved pad life. The various sizes give you total freedom of choice over the delicate balance of power versus weight.

- Pair of N-type disc brake pads with fins, for 1 caliper - Fits 4-piston SLX, XT and XTR calipers from 12-speed generation groups - Ice Technologies fins & aluminum backplate cools down the brakes in use, which improves braking consistency and power and reduces brake fade during long, technical downhill stretches - Longer lasting than D-type pads - Spring included Model Compatibility: Shimano BR-M9120, BR-M8120, BR-M8020, BR-M7120, BR-M820, BR-M810, BR-M640, BR-MT520

Shimano's BR-R451 Road Brake Calipers feature a sleek, minimalist design while providing excellent stopping power when you need it. - Compatible with STI and brake levers that are Super SLR enabled (Dura Ace Di2 7970, Dura Ace 7900, Ultegra Di2 6770, Ultegra 6700, 105 5700, Tiagra 4600) - Light action and accurate brake power - Adjustable toe-in brake shoes - Use of these calipers with standard SLR enabled STI and brake levers results in a "mushy" brake response - Brake Lever Actuation: Short Pull Super SLR - Brake Mount Type: Mid Reach Caliper (47mm - 57mm) - Brake Position: Front - Defined Color: Black - Pad Type: Cartridge

Jagwire's Road Pro Inserts (Campagnolo) are a nice upgrade for Campagnolo sidepull brakes. They're made of Jagwire's Pro Series compound in three versions for excellent stopping power in all conditions and with aluminum and carbon rims. Choose from Friction Fit and Click Fit for Campagnolo regular and Skeleton brakes respectively.

SRAM's right-side Rival 22 Hydraulic Disc Brake and Brake Lever is descended from their top-end RED road group offer precise braking performance. The aluminum brake lever and shift paddle deliver smooth modulation and deft shifts while keeping the weight impressively low. The ErgoFit textured body improves grip and finger wrap with reduced diameter, providing better control and a better transition to the bar. For optimal feel, you can also set your lever reach to fit your hands thanks to Reach Adjust. SRAM's Rival 22 right shifter is designed to work with a SRAM 11-speed cassette. The forged aluminum disc caliper is optimized to give you the stopping power and modulation you need for road and cyclocross riding. A fully-sealed hydraulic system prevents contamination during muddy cross races and epic dirt-road slugfests. Once you experience the incredible ability of SRAM's Rival 22 Hydraulics, you'll never go back to rim brakes again!